Thomas Dankowski's Metal Detecting Forum

Found 2 new frequencies.

https://www.youtube.com/watch?v=Jmc3Z4TTheQ

Very interesting & informative. Thanks for posting it.

Go ahead and look at the frequencies Transmitted in each of 14 max, 24 max, and 40 max frequency bands by manually selecting the different channels.

Guess what.
The detector from a performance standpoint can actually improve (or be degraded) depending on the detecting scenario vs (actual) freq transmitted.
I have been showing via video.

Case in point
Can I sweep a target using 40 max freq channel 6 that I can’t hear (or hear as well) using 40 max freq channel 0 - using equal silencer. YES!!
I can even hear when sweeping some scenarios where 40 max freq channel 6 with even a higher silencer setting when compared to 40 max channel 0 with a lower silencer are Mia or severely compromised.
You heard it hear from me. And I have not seen anyone else ever mention or talk about this.

I don’t salt beach hunt.
I do wonder.
If we do depth tests on salt beach using beach sensitive (40 max) and compare channel 0 to channel 6 are they equals.?
And the same question comparing beach programs 24 max comparing channel 0 and channel 6 on some smaller gold rings wet salt sand.

And using beach Sens 40 max freq and look at some gold chains wet salt sand. Does channel 6 have any advantage over channel 0 since channel 6 runs at higher freq (assuming emi not a factor?

Here’s Video I have done as of late. . Showing what might happen to user in the wild.

https://m.youtube.com/watch?v=6gsnn75xy_c

Another one,
https://m.youtube.com/watch?v=romhmqu1s_c

Another one.
https://m.youtube.com/watch?v=6gsnn75xy_c&t=37s

Another one.
https://m.youtube.com/watch?v=naHL63cL7oc&t=5s

Another one.
https://m.youtube.com/watch?v=Lmsqo4mBbZU&t=6s

Another one.
https://m.youtube.com/watch?v=UofLvqRiVTQ&t=114s

Another one.
https://m.youtube.com/watch?v=QnPPvthHLJ0

You are correct. The frequency shifts absolutely make a difference. I've even noticed a slight increase in the transmit amplitude in some of the shifts. Still I am very pleased with the performance of this machine. Keep up the videos.

More videos showing beach and beach sensitive altering freq within 24 max and 40 max. Iron and bottle caps. Gold ring.

https://m.youtube.com/watch?v=oaXzw0eLR0s

https://m.youtube.com/watch?v=F1vEWUk5uRQ&t=47s

https://m.youtube.com/watch?v=HG3IVxJ5ztk&t=6s

https://m.youtube.com/watch?v=JJmd8vkq12I

These 2 videos done by me time wise close to each other.

https://m.youtube.com/watch?v=TwHbguu2ZAQ

https://m.youtube.com/watch?v=Gn8aenqqTjo&t=64s

Debunking the debunkers.
https://m.youtube.com/watch?v=dQJHYmQbu6o

Auto freq scan and manual freq scan talked about. And its negatives shown gold ring and nail in demo.
https://m.youtube.com/watch?v=2xeOxjdaXWo