Fisher CZ3D Problem

This is an open discussion forum about metal detecting. Please be generally polite and respectful. Please note that Dankowski Detectors now has Terms of Use provisions. Nothing has really changed, its just now everything is written down for the sake of those who in the past liked to argue. If anybody sees anything unreasonable or disagreeable in the Terms of Use, please let me know.
Forum rules
Post Reply
Steve in OK
Posts: 2
Joined: Thu Feb 29, 2024 7:05 pm

Fisher CZ3D Problem

Post by Steve in OK »

anyone have any idea what I could do to fix my CZ? It powers up fine and will detect any target but the needle indicates the target id but when you move off the target the needle does not return to 0. You can turn the machine off and it zeros out. Any ideas? :?:
Top
Rick, N. MI
Posts: 8
Joined: Wed Feb 14, 2024 9:03 pm

Re: Fisher CZ3D Problem

Post by Rick, N. MI »

Fisher will repair it.
Top
NASA-Tom
Posts: 88
Joined: Sun Feb 11, 2024 2:04 am

Re: Fisher CZ3D Problem

Post by NASA-Tom »

That is NOT a problem. That is the DESIGN!
The needle will stay locked on to the last target detected!!!
Top
EL NINO
Posts: 19
Joined: Sun Feb 11, 2024 10:38 pm

Re: Fisher CZ3D Problem

Post by EL NINO »

It is as Tom writes,,, the pointer holds the ID of the last captured target... I have a CZ6A...
Top
Steve in OK
Posts: 2
Joined: Thu Feb 29, 2024 7:05 pm

Re: Fisher CZ3D Problem

Post by Steve in OK »

thank all for the replies. I guess it has been so long since I used it that I forgot that it locks on the target. I need to get it outside this afternoon and get reacquainted with it! Thanks all and happy hunting.
Top
Post Reply

Return to “Tom Dankowski's Metal Detecting Forum”