Thomas Dankowski's Metal Detecting Forum

VERSA-program Field 1F 40Khz in "IRON CARPET" Test...
https://youtube.com/shorts/hVfM1q_COlI?feature=share

Golden- Mask-Coin Killer-15Khz ..in "IRON CARPET TEST"
https://youtu.be/II_E0bX59qQ

Equinox 800 -program Field2 in.."IRON CARPET TEST"..
https://youtube.com/shorts/6CKSXHzdLeE?feature=share

Target /Coin/..used in .."IRON CARPET TEST"..
https://youtube.com/shorts/q8KfCoi2IXo?feature=share

DEUS1 Hf eliptical coil -program Fast- 29khz vs 74khz..in "IRON CARPET TEST".
https://youtu.be/aZlAYoDhaoQ

Exactly as Blackflag stated.

This test is very demanding...because this game involves more factors and parameters of the given detector..

The most important parameters are 1. coil size, 2. used frequency, 3. used detector discrimination, 4. used level of recovery sped, 5. silencer setting - iron bias, 6. use of audio profile type.

Another important factor is the quality of the detector's discrimination, because not every detector can eliminate the falsification of the signal due to such a dense occupation of the surface by old wrought iron, for example, as is the case with the detector Golden mask, ORX, Deus 1/if you use the audio profile 2,3,4 tones. .or a 5-tone audio profile..where falsification on iron is very evident - and where only the fulltone or Pitch audio profile works well.

Of course, the good results in testing need to be verified with detections in the field... which I am doing...

https://youtu.be/vGNIbqMQ6b8

EL NINO wrote: ↑Fri Apr 05, 2024 6:34 am Vista Gold Gain 30khz -in "IRON CARPET" TEST...

https://youtu.be/p5DBdvt7QA4

After further testing on the iron carpet, I optimized the Vista Gold Gain 30 khz detector setting... for this 2D separation situation in detecting the target under the iron carpet... the results are really better...

https://youtu.be/VVq8zKtJ7d8